Guide 13 min read

ITAR Attorney vs ITAR Consultant: When to Hire Each

J

November 16, 2026

If you are comparing an ITAR attorney against an ITAR consultant, you are probably in one of two situations. Either something already went wrong and you want to know who to call first, or nothing has gone wrong yet and you are trying to build a program without overpaying for the wrong kind of help. The answer is different in each case, and in my view most of the confusion comes from treating this as an either/or choice when it is really a question of sequence.

I am Jared Clark, and I run Certify Consulting. I hold a JD, but I work as a consultant, and that distinction matters for what follows because the line between the two roles is mostly about privilege, representation, and who carries which kind of risk. This guide lays out where that line sits, which tasks belong on which side of it, and how to decide when you are staring at a specific problem.

The Short Answer

Hire an ITAR attorney when the problem involves legal exposure: a suspected violation, a government inquiry, a disclosure to the Directorate of Defense Trade Controls (DDTC), an acquisition with foreign ownership, or any situation where you need privileged advice. Hire an ITAR consultant when the problem is operational: building a compliance program, registering with DDTC, classifying products, writing a technology control plan, training staff, or preparing for an audit.

Many companies need both, usually at different times and sometimes at the same time. The cleanest arrangement I have seen is a consultant doing the operational work, with outside counsel on call for anything that could become an enforcement matter.

Situation Start with Why
Suspected unauthorized export or release of technical data Attorney Privilege, and a decision about 22 CFR 127.12 disclosure
Letter, subpoena, or inquiry from DDTC, DOJ, or another agency Attorney Representation and protection of your position
Acquisition, merger, or foreign investment in a registrant Attorney Notification duties under 22 CFR 122.4 and deal structure
First-time DDTC registration Consultant (attorney optional) Mostly process and documentation
Building an ITAR compliance program Consultant Procedures, training, recordkeeping design
Self-classification against the USML Consultant with engineering input Technical analysis against 22 CFR 121.1
Disputed jurisdiction (ITAR vs EAR) Both Technical case plus a legal strategy for the commodity jurisdiction request
Internal compliance audit Consultant, or attorney if you want privilege Depends on what you expect the audit to find
Employee or visitor access questions (deemed exports) Consultant first, attorney if a release already happened Process fix versus legal exposure

What Does an ITAR Attorney Actually Do?

An export controls attorney is licensed to practice law and can give legal advice, represent you before an agency, and structure communications so they are protected by attorney-client privilege. For ITAR work that usually means four kinds of tasks.

Enforcement and disclosure. If you discover a possible violation, counsel decides with you whether to file a voluntary disclosure under 22 CFR 127.12. The regulation expects an initial notification immediately after a violation is discovered and a full disclosure within 60 calendar days of that notification. Counsel drafts the narrative, manages the interaction with DDTC, and negotiates if the matter turns into a consent agreement. For the mechanics, see our page on the voluntary disclosure process.

Transactions and structure. Under 22 CFR 122.4, a registrant has to notify DDTC of certain changes, and a planned sale or transfer of ownership or control to a foreign person requires advance notice of at least 60 days. Lawyers building a deal around that timeline are doing something a consultant cannot do for you, which is protect the deal itself.

Contested positions. When you and the government may disagree about whether a product is ITAR-controlled, or whether an activity was a defense service under 22 CFR 120.32, you need someone who can build a legal argument and not only a technical one.

Criminal and civil exposure. Under the Arms Export Control Act, 22 U.S.C. 2778(c), willful violations carry criminal penalties of up to $1,000,000 per violation and up to 20 years of imprisonment. Civil penalties under 22 U.S.C. 2778(e) and 22 CFR 127.10 are adjusted annually for inflation, and the per-violation figure now sits well above $1 million. If you work at a company with a few hundred or a thousand employees and you are asking what penalties exist, those statutory figures apply regardless of company size, and individuals can be exposed along with the company.

The privilege point

This is the single most useful reason to bring in a lawyer early. Communications with a consultant are generally not privileged. The doctrine from United States v. Kovel, 296 F.2d 918 (2d Cir. 1961), can extend privilege to a non-lawyer when counsel retains that person to help the lawyer give legal advice, but that only works when the lawyer directs the engagement and the work is for legal advice. A consultant I hire directly to audit your program does not create privileged work product just because the findings are sensitive.

I think this matters more than most people realize. If you suspect an audit may find something ugly, ask counsel to retain the consultant. If the audit is routine program maintenance, a direct engagement is simpler and cheaper.

What Does an ITAR Consultant Actually Do?

A consultant builds and maintains the machinery of compliance. The work is practical, document-heavy, and repetitive in a good way, because the goal is that your people follow the same steps every time.

Registration. Anyone engaged in the United States in manufacturing or exporting defense articles or furnishing defense services must register with DDTC under 22 CFR 122.1, including companies that only manufacture and never export. The filing uses the DS-2032 Statement of Registration, with a fee schedule in 22 CFR 122.3. There is no ITAR "certification" issued by the government, which is worth knowing because "ITAR certification cost" is a common search. What you are paying for is registration, plus whatever help you hire to prepare it. Our guide to ITAR registration covers the filing steps.

Classification support. Classification is a technical decision before it is a legal one. You compare the item against the USML categories in 22 CFR 121.1 and its "specially designed" and technical parameters, and you document why. If the analysis is unclear, a commodity jurisdiction request under 22 CFR 120.4 (Form DS-4076, filed through DECCS) asks DDTC to decide. A consultant who understands both the USML and the Commerce Control List can organize the engineering inputs and write a defensible rationale.

Program design. DDTC published its ITAR Compliance Program Guidelines in December 2022, and they are the closest thing to a government-written blueprint for what a program should contain: management commitment, identification and classification, licensing, recordkeeping, training, auditing, and handling of violations. Consultants turn those elements into procedures your staff will actually use. See our overview of an ITAR compliance program for how the pieces fit.

Technology control and access. A technology control plan limits who can see technical data, and the definition of technical data in 22 CFR 120.33 is broad enough that it reaches drawings, specifications, and even a casual email attachment. Designing the access controls, badge and network segregation, and visitor procedures is operational work.

Training and recordkeeping. Under 22 CFR 122.5, registrants keep records for five years from the expiration of the license or other approval. A consultant can design the retention system and run staff training so that the records exist when someone asks for them.

A Comparison of the Two Roles

Factor ITAR attorney ITAR consultant
Can give legal advice Yes No
Attorney-client privilege Yes Generally no, unless retained by counsel (Kovel)
Represents you before DDTC or DOJ Yes No, though a consultant can prepare submissions you sign
Strongest at Disclosures, enforcement, deals, disputes Programs, registration, classification, training, audits
Typical output Legal opinions, disclosure filings, negotiated outcomes Procedures, matrices, plans, trained staff
Billing pattern Hourly or flat fee per matter Project fee, retainer, or hourly
Best time to engage When exposure exists or is likely Before exposure, and on a recurring basis

On cost, I would rather point you to what we have written than quote a number in an article. Our post on what ITAR consulting costs walks through the variables that drive the price. The general pattern is that attorneys cost more per hour and consultants cost more in total hours of hands-on program work, so a lawyer doing a consultant's job is usually the expensive mistake.

When Should You Call an Attorney First?

Here are the situations where I tell people to start with counsel, even if they originally called me.

  1. You found a possible violation. Examples: technical data emailed to a foreign national colleague, a drawing uploaded to an overseas contractor's portal, an item shipped without a license. Do not start an internal investigation run by a consultant. Call counsel so the review is privileged and so the disclosure decision under 22 CFR 127.12 is made deliberately. I have written about how accidental violations happen by email, and the common thread is that the first week matters most.
  2. You received government correspondence. A DDTC letter requesting information, a subpoena, or a visit from investigators is a legal event.
  3. A foreign party is about to own or control part of a registrant. The 60-day advance notice in 22 CFR 122.4(b) will govern your deal timeline.
  4. You are in a prohibited-country context. Part 126 and especially 22 CFR 126.1 restrict exports and sales to named countries, and proposals involving them carry a notification duty. The legal stakes are too high to improvise.
  5. A former employee or insider is making allegations. That is an employment and enforcement problem together.
  6. You disagree with DDTC's position on a classification or a licensing condition and want to push back.

When Should You Call a Consultant First?

  1. You just won a defense subcontract and the flow-down clauses mention ITAR for the first time. Our post on what to do after winning a defense contract is aimed at exactly this moment.
  2. You need to register with DDTC and have never done it.
  3. You do not know whether your products are ITAR-controlled. A structured classification review is the right first step, and it should end in a written rationale you can show an auditor.
  4. You have no written compliance program, or you have one that nobody follows.
  5. You are preparing for a customer audit, a prime contractor assessment, or a CMMC review. The overlap with cybersecurity controls is real, and our comparison of ITAR and CMMC explains where they differ.
  6. You employ foreign nationals or host foreign visitors and need access controls before anyone is exposed to technical data.

The Citizenship Question

The most common search in this space right now is about ITAR citizenship requirements, and it is worth clearing up because it drives hiring decisions. ITAR does not impose a blanket citizenship requirement on employees. What it regulates is the release of technical data to foreign persons. A "U.S. person" under 22 CFR 120.62 includes citizens, lawful permanent residents, and certain protected individuals under 8 U.S.C. 1324b(a)(3). Everyone else is a foreign person under 22 CFR 120.63, and giving them access to controlled technical data is an export that needs authorization, wherever they are standing when it happens. For the details, see our page on deemed exports.

Is that a legal question or an operational one? Both, which is why it shows up on both lists. Designing access controls is consulting work. Deciding what to do when a foreign-national employee has already seen controlled files is a counsel matter.

How Do You Structure a Combined Engagement?

Companies that handle this well usually follow a pattern like the one below.

  1. Name an empowered official internally. Registration under Part 122 requires senior officers and the empowered official to meet eligibility rules, and this person has the authority to inquire into any aspect of a proposed export and to refuse to sign. Neither a consultant nor an outside attorney can fill that role for you.
  2. Retain a consultant for the baseline. Registration, classification, program documentation, TCP, training. This is the bulk of the effort and the bulk of the hours.
  3. Identify a lawyer before you need one. A short call with an export controls attorney ahead of time means you are not searching under stress. Ask whether they will accept a referral from your consultant and how they handle privilege on audits.
  4. Decide in advance how audits will be run. Routine annual reviews go to the consultant directly. Anything prompted by a suspected problem is routed through counsel.
  5. Write down the escalation trigger. Your procedures should say, in plain words, that any suspected unauthorized release goes to the empowered official and counsel within a set number of days, and does not get fixed quietly by an engineer.

Questions to Ask Before You Hire Either One

For an attorney:

  • How many DDTC voluntary disclosures have you prepared, and were any resolved without a consent agreement?
  • Will you take direction on a consultant-assisted audit so that privilege holds?
  • Do you handle both ITAR and EAR matters, or only one?

For a consultant:

  • Who actually does the work, and have they classified items against 22 CFR 121.1 themselves?
  • What deliverables will I own at the end, and are they editable by my staff?
  • What do you refer to counsel, and do you say so in the engagement letter?

A consultant who says they can handle a disclosure alone, or an attorney who says they will rebuild your whole program at their hourly rate, is telling you something about how they work. I would listen.

A Quick Checklist for Choosing

  • Is there a possible violation, an inquiry, or a deal involving foreign ownership? If yes, start with counsel.
  • Do you need procedures, registration, classification, or training? If yes, start with a consultant.
  • Do you want the findings of a review protected? If yes, have counsel retain the consultant.
  • Do you have an empowered official and a written escalation path? If not, fix that first.
  • Do you know which USML category, if any, covers your product? If not, schedule classification before anything else.
  • Are your records retained for the five years 22 CFR 122.5 expects? If not, fix that before the next audit.

If you are comparing options and want a view on which side of the line your situation falls, the ITAR readiness self-assessment is a reasonable starting point, and you can reach us through the contact page when you are ready to talk specifics.

Last updated: 2026-11-16

Frequently Asked Questions

Do I need an ITAR attorney or an ITAR consultant?

Hire an attorney for legal exposure: suspected violations, voluntary disclosures under 22 CFR 127.12, government inquiries, and foreign-ownership transactions. Hire a consultant for operational work such as registration, classification, compliance program design, technology control plans, and training. Many companies use both.

Is communication with an ITAR consultant protected by attorney-client privilege?

Generally no. Privilege can extend to a consultant only when an attorney retains them to help provide legal advice, following the principle in United States v. Kovel, 296 F.2d 918 (2d Cir. 1961). If you expect an audit to uncover a violation, have counsel retain the consultant.

Is there an official ITAR certification?

No. The government does not issue an ITAR certification. Companies that manufacture or export defense articles or furnish defense services register with DDTC under 22 CFR 122.1, and the registration fee is set in 22 CFR 122.3. Any additional cost is for preparation or compliance support.

Does ITAR require employees to be U.S. citizens?

Not as a blanket rule. ITAR controls release of technical data to foreign persons. A U.S. person under 22 CFR 120.62 includes citizens, lawful permanent residents, and certain protected individuals. Foreign persons (22 CFR 120.63) need authorization before accessing controlled technical data.

What are the penalties for ITAR violations?

Under 22 U.S.C. 2778(c), willful violations carry criminal fines up to $1,000,000 per violation and up to 20 years imprisonment. Civil penalties under 22 U.S.C. 2778(e) and 22 CFR 127.10 are inflation-adjusted annually. Company size does not change the statutory exposure.

J

Jared Clark

Principal Consultant, Certify Consulting

Jared Clark is the founder of Certify Consulting, helping organizations achieve and maintain compliance with international standards and regulatory requirements.